работает ли GeoIP

Вопросы касающиеся настройки, функционирования виртуальных серверов
Правила форума
1. Один вопрос - одна тема. Не надо задавать в той же теме другие вопросы.
2. Не пишите в чужих темах, если ваша проблема не имеет отношения к обсуждаемой.
3. Давайте полное описание проблемы - имя сайта, имя сервера, учётная запись, способ воспроизведения, скриншот ошибки.
4. Пароли выкладывать в форум - НЕ НАДО
djos
Сообщения: 85
Зарегистрирован: 2012-02-19, 17:53:34
Контактная информация:

работает ли GeoIP

Сообщение djos »

Вот такой еще вопрос я установил гео ип как узнать работает он ли нет?
До простите меня Засранца
lissyara
Site Admin
Сообщения: 6451
Зарегистрирован: 2009-09-19, 22:04:41

Re: работает ли GeoIP

Сообщение lissyara »

уcтановили что именно?
саму утилиту и базу, модуль для apache ... ?
--
и научитесь уже заводить отдельные темы для разных вопросов
Убей их всех! Бог потом рассортирует...
djos
Сообщения: 85
Зарегистрирован: 2012-02-19, 17:53:34
Контактная информация:

Re: работает ли GeoIP

Сообщение djos »

Вот просто ввел эту команду

Код: Выделить всё

/usr/ports/www/mod_geoip/>make && make install && make clean
До простите меня Засранца
lissyara
Site Admin
Сообщения: 6451
Зарегистрирован: 2009-09-19, 22:04:41

Re: работает ли GeoIP

Сообщение lissyara »

должно быть как тут: http://srv3.host-food.ru/info.php
что-то такого плана:

Код: Выделить всё

GEOIP_ADDR 	79.164.50.20
GEOIP_CONTINENT_CODE 	EU
GEOIP_COUNTRY_CODE 	RU
GEOIP_COUNTRY_NAME 	Russian Federation
GEOIP_REGION 	48
GEOIP_REGION_NAME 	Moscow City
GEOIP_CITY 	Moscow
GEOIP_DMA_CODE 	0
GEOIP_METRO_CODE 	0
GEOIP_AREA_CODE 	0
GEOIP_LATITUDE 	55.752201
GEOIP_LONGITUDE 	37.615601
GEOIP_ORGANIZATION 	Central telegraph 
Убей их всех! Бог потом рассортирует...
djos
Сообщения: 85
Зарегистрирован: 2012-02-19, 17:53:34
Контактная информация:

Re: работает ли GeoIP

Сообщение djos »

Чтот я там такого не вижу

вот кроме того что я установил по

Код: Выделить всё

/usr/ports/www/mod_geoip/>make && make install && make clean
Мне ни чего больше не нужно делать, а то я столько статей прочитал все чтоб я не делал заканчиванется отключением сайта и приходится все востанавливать до изменений
До простите меня Засранца
lissyara
Site Admin
Сообщения: 6451
Зарегистрирован: 2009-09-19, 22:04:41

Re: работает ли GeoIP

Сообщение lissyara »

апач перезапустить - как минимум
Убей их всех! Бог потом рассортирует...
djos
Сообщения: 85
Зарегистрирован: 2012-02-19, 17:53:34
Контактная информация:

Re: работает ли GeoIP

Сообщение djos »

Ну эт и ежу понятно что перезагрузить нуно а дальше что?
До простите меня Засранца
lissyara
Site Admin
Сообщения: 6451
Зарегистрирован: 2009-09-19, 22:04:41

Re: работает ли GeoIP

Сообщение lissyara »

lissyara писал(а):должно быть как тут: http://srv3.host-food.ru/info.php
что-то такого плана:

Код: Выделить всё

GEOIP_ADDR 	79.164.50.20
GEOIP_CONTINENT_CODE 	EU
GEOIP_COUNTRY_CODE 	RU
GEOIP_COUNTRY_NAME 	Russian Federation
GEOIP_REGION 	48
GEOIP_REGION_NAME 	Moscow City
GEOIP_CITY 	Moscow
GEOIP_DMA_CODE 	0
GEOIP_METRO_CODE 	0
GEOIP_AREA_CODE 	0
GEOIP_LATITUDE 	55.752201
GEOIP_LONGITUDE 	37.615601
GEOIP_ORGANIZATION 	Central telegraph 
Убей их всех! Бог потом рассортирует...
djos
Сообщения: 85
Зарегистрирован: 2012-02-19, 17:53:34
Контактная информация:

Re: работает ли GeoIP

Сообщение djos »

как запустить phpinfo?
До простите меня Засранца
lissyara
Site Admin
Сообщения: 6451
Зарегистрирован: 2009-09-19, 22:04:41

Re: работает ли GeoIP

Сообщение lissyara »

Убей их всех! Бог потом рассортирует...
djos
Сообщения: 85
Зарегистрирован: 2012-02-19, 17:53:34
Контактная информация:

Re: работает ли GeoIP

Сообщение djos »

Я все равно не понял как =)
До простите меня Засранца
lissyara
Site Admin
Сообщения: 6451
Зарегистрирован: 2009-09-19, 22:04:41

Re: работает ли GeoIP

Сообщение lissyara »

Код: Выделить всё

<?php

phpinfo();

?>
положите файл с таким содержимым и посмотрите его в браузере
расширение файла должно быть .php
Убей их всех! Бог потом рассортирует...
djos
Сообщения: 85
Зарегистрирован: 2012-02-19, 17:53:34
Контактная информация:

Re: работает ли GeoIP

Сообщение djos »

lissyara писал(а):должно быть как тут: http://srv3.host-food.ru/info.php
что-то такого плана:

Код: Выделить всё

GEOIP_ADDR 	79.164.50.20
GEOIP_CONTINENT_CODE 	EU
GEOIP_COUNTRY_CODE 	RU
GEOIP_COUNTRY_NAME 	Russian Federation
GEOIP_REGION 	48
GEOIP_REGION_NAME 	Moscow City
GEOIP_CITY 	Moscow
GEOIP_DMA_CODE 	0
GEOIP_METRO_CODE 	0
GEOIP_AREA_CODE 	0
GEOIP_LATITUDE 	55.752201
GEOIP_LONGITUDE 	37.615601
GEOIP_ORGANIZATION 	Central telegraph 
У меня такого нет что делать?
До простите меня Засранца
lissyara
Site Admin
Сообщения: 6451
Зарегистрирован: 2009-09-19, 22:04:41

Re: работает ли GeoIP

Сообщение lissyara »

поверить в конфиге апача - не закоментирован ли модуль
Убей их всех! Бог потом рассортирует...
djos
Сообщения: 85
Зарегистрирован: 2012-02-19, 17:53:34
Контактная информация:

Re: работает ли GeoIP

Сообщение djos »

Вот такая строка есть и все вроде

Код: Выделить всё

#LoadModule geoip_module       libexec/apache22/mod_geoip.so

Код: Выделить всё

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/foo_log"
# with ServerRoot set to "/usr/local" will be interpreted by the
# server as "/usr/local//var/log/foo_log".

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/usr/local"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module libexec/apache22/mod_authn_file.so
LoadModule authn_dbm_module libexec/apache22/mod_authn_dbm.so
LoadModule authn_anon_module libexec/apache22/mod_authn_anon.so
LoadModule authn_default_module libexec/apache22/mod_authn_default.so
LoadModule authn_alias_module libexec/apache22/mod_authn_alias.so
LoadModule authz_host_module libexec/apache22/mod_authz_host.so
LoadModule authz_groupfile_module libexec/apache22/mod_authz_groupfile.so
LoadModule authz_user_module libexec/apache22/mod_authz_user.so
LoadModule authz_dbm_module libexec/apache22/mod_authz_dbm.so
LoadModule authz_owner_module libexec/apache22/mod_authz_owner.so
LoadModule authz_default_module libexec/apache22/mod_authz_default.so
LoadModule auth_basic_module libexec/apache22/mod_auth_basic.so
LoadModule auth_digest_module libexec/apache22/mod_auth_digest.so
LoadModule file_cache_module libexec/apache22/mod_file_cache.so
LoadModule cache_module libexec/apache22/mod_cache.so
LoadModule disk_cache_module libexec/apache22/mod_disk_cache.so
LoadModule dumpio_module libexec/apache22/mod_dumpio.so
LoadModule include_module libexec/apache22/mod_include.so
LoadModule filter_module libexec/apache22/mod_filter.so
LoadModule charset_lite_module libexec/apache22/mod_charset_lite.so
LoadModule deflate_module libexec/apache22/mod_deflate.so
LoadModule log_config_module libexec/apache22/mod_log_config.so
LoadModule logio_module libexec/apache22/mod_logio.so
LoadModule env_module libexec/apache22/mod_env.so
LoadModule mime_magic_module libexec/apache22/mod_mime_magic.so
LoadModule cern_meta_module libexec/apache22/mod_cern_meta.so
LoadModule expires_module libexec/apache22/mod_expires.so
LoadModule headers_module libexec/apache22/mod_headers.so
LoadModule usertrack_module libexec/apache22/mod_usertrack.so
LoadModule setenvif_module libexec/apache22/mod_setenvif.so
LoadModule version_module libexec/apache22/mod_version.so
LoadModule proxy_module libexec/apache22/mod_proxy.so
LoadModule ssl_module libexec/apache22/mod_ssl.so
LoadModule mime_module libexec/apache22/mod_mime.so
LoadModule dav_module libexec/apache22/mod_dav.so
LoadModule status_module libexec/apache22/mod_status.so
LoadModule autoindex_module libexec/apache22/mod_autoindex.so
LoadModule asis_module libexec/apache22/mod_asis.so
LoadModule info_module libexec/apache22/mod_info.so
LoadModule suexec_module libexec/apache22/mod_suexec.so
LoadModule cgi_module libexec/apache22/mod_cgi.so
LoadModule dav_fs_module libexec/apache22/mod_dav_fs.so
LoadModule vhost_alias_module libexec/apache22/mod_vhost_alias.so
LoadModule negotiation_module libexec/apache22/mod_negotiation.so
LoadModule dir_module libexec/apache22/mod_dir.so
LoadModule imagemap_module libexec/apache22/mod_imagemap.so
LoadModule actions_module libexec/apache22/mod_actions.so
LoadModule speling_module libexec/apache22/mod_speling.so
LoadModule userdir_module libexec/apache22/mod_userdir.so
LoadModule alias_module libexec/apache22/mod_alias.so
LoadModule rewrite_module libexec/apache22/mod_rewrite.so
#LoadModule fcgid_module libexec/apache22/mod_fcgid.so
LoadModule php5_module        libexec/apache22/libphp5.so
#LoadModule rpaf_module        libexec/apache22/mod_rpaf2.so
#LoadModule geoip_module       libexec/apache22/mod_geoip.so

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User www
Group www

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin you@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/usr/local/www/apache22/data"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/usr/local/www/apache22/data">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html index.htm index.php index.cgi
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "/var/log/httpd-error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog "/var/log/httpd-access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog "/var/log/httpd-access.log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/usr/local/www/apache22/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock /var/run/cgisock
</IfModule>

#
# "/usr/local/www/apache22/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/usr/local/www/apache22/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig etc/apache22/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    AddType text/html .shtml
    AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile etc/apache22/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the etc/apache22/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
<VirtualHost 91.227.18.42:80>
	ServerName rookey.ru
	DocumentRoot /home/djos/data/www/rookey.ru
	AssignUserID djos djos 
	CustomLog /home/httpd-logs/rookey.ru.access.log combined
	ErrorLog /home/httpd-logs/rookey.ru.error.log
	ServerAlias www.rookey.ru
	ServerAdmin webmaster@rookey.ru
	ScriptAlias /cgi-bin/ /home/djos/data/www/rookey.ru/cgi-bin/
	php_admin_value open_basedir "/home/djos/data:."
	php_admin_value sendmail_path "/usr/sbin/sendmail -t -i -f webmaster@rookey.ru"
	php_admin_value upload_tmp_dir "/home/djos/data/mod-tmp"
	php_admin_value session.save_path "/home/djos/data/mod-tmp"
	AddType application/x-httpd-php .php .php3 .php4 .php5 .phtml
	AddType application/x-httpd-php-source .phps
</VirtualHost>
<VirtualHost 91.227.18.42:80>
	ServerName claneic.ru
	DocumentRoot /home/djos/data/www/claneic.ru
	AssignUserID djos djos 
	CustomLog /home/httpd-logs/claneic.ru.access.log combined
	ErrorLog /home/httpd-logs/claneic.ru.error.log
	ServerAlias www.claneic.ru
	ServerAdmin webmaster@claneic.ru
	ScriptAlias /cgi-bin/ /home/djos/data/www/claneic.ru/cgi-bin/
	php_admin_value open_basedir "/home/djos/data:."
	php_admin_value sendmail_path "/usr/sbin/sendmail -t -i -f webmaster@claneic.ru"
	php_admin_value upload_tmp_dir "/home/djos/data/mod-tmp"
	php_admin_value session.save_path "/home/djos/data/mod-tmp"
	AddType application/x-httpd-php .php .php3 .php4 .php5 .phtml
	AddType application/x-httpd-php-source .phps
</VirtualHost>
<VirtualHost 91.227.18.42:80>
	ServerName q.rookey.ru
	DocumentRoot /home/djos/data/www/q.rookey.ru
	AssignUserID djos djos 
	CustomLog /home/httpd-logs/q.rookey.ru.access.log combined
	ErrorLog /home/httpd-logs/q.rookey.ru.error.log
	ServerAlias www.q.rookey.ru
	ServerAdmin webmaster@q.rookey.ru
	ScriptAlias /cgi-bin/ /home/djos/data/www/q.rookey.ru/cgi-bin/
	php_admin_value open_basedir "/home/djos/data:."
	php_admin_value sendmail_path "/usr/sbin/sendmail -t -i -f webmaster@q.rookey.ru"
	php_admin_value upload_tmp_dir "/home/djos/data/mod-tmp"
	php_admin_value session.save_path "/home/djos/data/mod-tmp"
	AddType application/x-httpd-php .php .php3 .php4 .php5 .phtml
	AddType application/x-httpd-php-source .phps
</VirtualHost>

<VirtualHost 91.227.18.42:80>
	ServerName c.claneic.ru
	DocumentRoot /home/djos/data/www/c.claneic.ru
	AssignUserID djos djos 
	CustomLog /home/httpd-logs/c.claneic.ru.access.log combined
	ErrorLog /home/httpd-logs/c.claneic.ru.error.log
	ServerAlias www.c.claneic.ru
	ServerAdmin webmaster@c.claneic.ru
	ScriptAlias /cgi-bin/ /home/djos/data/www/c.claneic.ru/cgi-bin/
	php_admin_value open_basedir "/home/djos/data:."
	php_admin_value sendmail_path "/usr/sbin/sendmail -t -i -f webmaster@c.claneic.ru"
	php_admin_value upload_tmp_dir "/home/djos/data/mod-tmp"
	php_admin_value session.save_path "/home/djos/data/mod-tmp"
	AddType application/x-httpd-php .php .php3 .php4 .php5 .phtml
	AddType application/x-httpd-php-source .phps
</VirtualHost>
<VirtualHost 91.227.18.42:80>
	ServerName wmstars.ru
	DocumentRoot /home/djos/data/www/wmstars.ru
	AssignUserID djos djos 
	CustomLog /home/httpd-logs/wmstars.ru.access.log combined
	ErrorLog /home/httpd-logs/wmstars.ru.error.log
	ServerAlias www.wmstars.ru
	ServerAdmin webmaster@wmstars.ru
	ScriptAlias /cgi-bin/ /home/djos/data/www/wmstars.ru/cgi-bin/
	php_admin_value open_basedir "/home/djos/data:."
	php_admin_value sendmail_path "/usr/sbin/sendmail -t -i -f webmaster@wmstars.ru"
	php_admin_value upload_tmp_dir "/home/djos/data/mod-tmp"
	php_admin_value session.save_path "/home/djos/data/mod-tmp"
	AddType application/x-httpd-php .php .php3 .php4 .php5 .phtml
	AddType application/x-httpd-php-source .phps
</VirtualHost>
Include etc/apache22/extra/httpd-mpm.conf

# Multi-language error messages
#Include etc/apache22/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include etc/apache22/extra/httpd-autoindex.conf

# Language settings
#Include etc/apache22/extra/httpd-languages.conf

# User home directories
#Include etc/apache22/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include etc/apache22/extra/httpd-info.conf

# Virtual hosts
#Include etc/apache22/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include etc/apache22/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include etc/apache22/extra/httpd-dav.conf

# Various default settings
#Include etc/apache22/extra/httpd-default.conf

# Secure (SSL/TLS) connections
Include etc/apache22/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

Include etc/apache22/Includes/*.conf

Include /usr/local/ispmgr/etc/ispmgr.inc
<Directory /home/djos/data/www/rookey.ru>
	php_admin_value open_basedir "/home/djos/data:."
	Options +ExecCGI +Includes
</Directory>
<Directory /home/djos/data/www/claneic.ru>
	php_admin_value open_basedir "/home/djos/data:."
	Options +ExecCGI +Includes
</Directory>
<Directory /home/djos/data/www/q.rookey.ru>
	php_admin_value open_basedir "/home/djos/data:."
	Options +ExecCGI +Includes
</Directory>
<Directory /home/djos/data/www/wmstars.claneic.ru>
	php_admin_value open_basedir "/home/djos/data:."
	Options +ExecCGI +Includes
</Directory>
<Directory /home/djos/data/www/wmstars.rookey.ru>
	php_admin_value open_basedir "/home/djos/data:."
	Options +ExecCGI +Includes
</Directory>
<Directory /home/djos/data/www/c.claneic.ru>
	php_admin_value open_basedir "/home/djos/data:."
	Options +ExecCGI +Includes
</Directory>
<Directory /home/djos/data/www/wmstars.ru>
	php_admin_value open_basedir "/home/djos/data:."
	Options +ExecCGI +Includes
</Directory>
NameVirtualHost 91.227.18.42:80

До простите меня Засранца
serge
Сообщения: 2465
Зарегистрирован: 2009-09-25, 15:58:07
Контактная информация:

Re: работает ли GeoIP

Сообщение serge »

Символ # в начале строки это метка комментария. Данная строка в итоге не учитывается в конфигурации ПО.
djos
Сообщения: 85
Зарегистрирован: 2012-02-19, 17:53:34
Контактная информация:

Re: работает ли GeoIP

Сообщение djos »

serge писал(а):Символ # в начале строки это метка комментария. Данная строка в итоге не учитывается в конфигурации ПО.
Удалил я # Этот символ от сюда

Код: Выделить всё

#LoadModule geoip_module       libexec/apache22/mod_geoip.so
и все равно не работает
До простите меня Засранца
lissyara
Site Admin
Сообщения: 6451
Зарегистрирован: 2009-09-19, 22:04:41

Re: работает ли GeoIP

Сообщение lissyara »

lissyara писал(а):апач перезапустить - как минимум
Убей их всех! Бог потом рассортирует...
djos
Сообщения: 85
Зарегистрирован: 2012-02-19, 17:53:34
Контактная информация:

Re: работает ли GeoIP

Сообщение djos »

Код: Выделить всё

v31164# apachectl restart
v31164# apachectl restart
v31164# apachectl restart
Вот вродь как перезапустил
До простите меня Засранца
lissyara
Site Admin
Сообщения: 6451
Зарегистрирован: 2009-09-19, 22:04:41

Re: работает ли GeoIP

Сообщение lissyara »

Код: Выделить всё

srv9# cat /usr/local/etc/apache22/Includes/httpd-GeoIP.conf 
# GeoIP
<IfModule mod_geoip.c>
        GeoIPEnable     On
        GeoIPOutput     All
        # main db
        GeoIPDBFile     /usr/local/share/GeoIP/GeoIP.dat
        # additional databases
        #GeoIPDBFile    /usr/local/share/GeoIP/GeoIPISP.dat
        GeoIPDBFile     /usr/local/share/GeoIP/GeoLiteCity.dat
        GeoIPDBFile     /usr/local/share/GeoIP/GeoIPCity.dat
        GeoIPDBFile     /usr/local/share/GeoIP/GeoIPOrg.dat
</IfModule>

srv9# 
научитесь читать документацию от используемого софта
там всё написано
Убей их всех! Бог потом рассортирует...
Закрыто